RO Membrane Selection for Las Vegas, NV Water
What's in Las Vegas's Water
Reported values from Las Vegas Valley Water District's 2025 water quality data. Feed water chemistry drives membrane choice, operating pressure, and cleaning frequency.
Source water
About 90% Colorado River water drawn from Lake Mead (ozonation, filtration, chlorination at two SNWA plants); ~10% deep Las Vegas Valley aquifer groundwater used mainly April-October
Copper note
one tap sample exceeded the 1.3 action level; 90th percentile compliant
Hardness note
280 ppm / 16 grains per gallon — the utility's own softener-setting guidance
Pfas note
PFOA, PFOS, PFBS, PFHxS, PFNA, GenX all not detected; Hazard Index ND
TTHM note
highest locational running annual average 72 vs the 80 MCL; individual samples to 83 allowed when the LRAA complies
Hardness
280 mg/L as CaCO3
Very hard — high scaling risk — expect antiscalant dosing, conservative recovery, and a regular cleaning schedule
Our Recommendation for Las Vegas
Membranes Matched to This Water
Running RO on Las Vegas water?
Send us your system size and feed water details — we'll spec the right membrane for your operation and quote same-day shipping.
Data Source
Water quality values on this page are taken from Las Vegas Valley Water District's 2025 published water quality report (PWS ID LVVWD (PWS ID not printed in report)). Values are utility-wide averages; water at a specific site can vary. For membrane selection on a critical system, test your actual feed water.
View the official report