Enviro Membranes.
All ProductsBrackish WaterSeawaterPumpsAbout UsBlog
(956) 843-0090
All Tigerflow pumps
Authorized Tigerflow distributor

CD5

Tigerflow CD5 vertical multistage pump

Tigerflow CD5 vertical multistage pumpCD series, shown: one size

Tigerflow's model key gives the CD5 a nominal flow of 5 m³/h (about 22 GPM). The number after the dash is the stage count, and more stages give more head. Stainless stages stack under a 2-pole TEFC motor, with ANSI Class 300 flanges. The finder below picks the stage count for your flow and head.

Models
19
Motor
1 to 7.5 HP
Power
3 voltages, 1 or 3-phase
Connection
ANSI 1-1/4" CL300 Flange
From $2,518list, per unit

19 models, 1 to 7.5 HP. Send the model and quantity and we reply with your price and freight.

Usually ships in about 5 days, plus transit time.

Tigerflow CD5 vertical multistage pumpCD series, shown: one size

CD Series Catalog 2023 (Tigerflow)

Curves, dimensions and weights (PDF)

Find your CD5 model

Enter the flow and the head your system needs. We draw your point on Tigerflow's CD5 curves and show the smallest model that reaches it.

Recommended range for CD5: 13.2 to 44 GPM.

Head is the pressure the pump adds: outlet minus inlet, not your feed pressure.

Enter your flow and head to pick a CD5 model.

Your point and the matching model appear here.

CD5 curves, head and flow

020040060080001020304050Flow, GPMHead, ft201816131074

Curves read from Tigerflow's CD Series Catalog 2023 (page 10), 3500 RPM, 60 Hz power, clean water. Each label is the stage count. Only the recommended part of each curve is drawn. On 50 Hz power a pump makes less head, so send us your numbers. This is a starting point: we confirm the model with you before we quote.

Models and part numbers

Use the finder above for your flow and head, then pick the HP and the voltage your site has here. Not sure? Put your flow and head in the request and we check the model with you.

  • CD5-31 HP

    115/230V, 1-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003358

    $2,518
  • CD5-31 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002993

    $2,523
  • CD5-41.5 HP

    115/230V, 1-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003359

    $3,024
  • CD5-41.5 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002994

    $3,076
  • CD5-62 HP

    115/230V, 1-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003360

    $3,698
  • CD5-62 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002995

    $3,128
  • CD5-73 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002996

    $3,647
  • CD5-73 HP

    230V, 1-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003361

    $4,496
  • CD5-93 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002997

    $3,662
  • CD5-93 HP

    230V, 1-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003362

    $4,595
  • CD5-103 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003370

    $3,818
  • CD5-103 HP

    230V, 1-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003363

    $4,703
  • CD5-105 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300003371

    $4,378
  • CD5-125 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002987

    $4,500
  • CD5-135 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002988

    $4,535
  • CD5-155 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002989

    $4,604
  • CD5-165 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002990

    $4,593
  • CD5-187.5 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002991

    $5,838
  • CD5-207.5 HP

    208-230/460V, 3-phase

    ANSI 1-1/4" CL300 Flange

    Part 3300002992

    $5,947
ModelHPPowerConnectionPart numberPriceRequest
CD5-31115/230V, 1-phaseANSI 1-1/4" CL300 Flange3300003358$2,518
CD5-31208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002993$2,523
CD5-41.5115/230V, 1-phaseANSI 1-1/4" CL300 Flange3300003359$3,024
CD5-41.5208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002994$3,076
CD5-62115/230V, 1-phaseANSI 1-1/4" CL300 Flange3300003360$3,698
CD5-62208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002995$3,128
CD5-73208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002996$3,647
CD5-73230V, 1-phaseANSI 1-1/4" CL300 Flange3300003361$4,496
CD5-93208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002997$3,662
CD5-93230V, 1-phaseANSI 1-1/4" CL300 Flange3300003362$4,595
CD5-103208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300003370$3,818
CD5-103230V, 1-phaseANSI 1-1/4" CL300 Flange3300003363$4,703
CD5-105208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300003371$4,378
CD5-125208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002987$4,500
CD5-135208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002988$4,535
CD5-155208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002989$4,604
CD5-165208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002990$4,593
CD5-187.5208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002991$5,838
CD5-207.5208-230/460V, 3-phaseANSI 1-1/4" CL300 Flange3300002992$5,947

Specifications

Pump type
Vertical multistage centrifugal pump
Impellers and body
304 and 316 stainless steel
Pump head and base
Cast iron or 316 stainless steel
Shaft seal
Cartridge seal: carbon, silicon carbide and Viton
Motor
NEMA TC frame, TEFC, 2-pole
Liquid temperature
5 to 248°F (every part number on this page is Tigerflow's hot water version)
Liquid pH
5 to 9
CD series range, all sizes
Up to 570 GPM and up to 805 ft of head
Drinking water
NSF/ANSI 61 and 372 certified pump (Tigerflow's UL certification)

From Tigerflow's catalogs, brochures and price list.

Ordering

How fast does it ship?

Usually ships in about 5 days, plus transit time. Your quote includes the freight.

Is it genuine Tigerflow?

Yes. We are an authorized Tigerflow distributor, and Tigerflow's warranty passes through to you.

What warranty does it have?

24 months from the ship date against defects in materials and workmanship. Parts that wear in normal use, such as mechanical seals: 9 months from the ship date or 6 months after installation, whichever ends first, if the installation report is sent in. Tigerflow repairs or replaces at its option; the buyer pays removal, reinstallation, labor and freight. Send warranty claims to us and we take care of them.

Can I return it?

Unused pumps and systems only, with our written authorization first. 25% restocking fee. The buyer pays return freight; original freight is not refunded. Defects go through the warranty. If the wrong pump was sent, there is no restocking fee and we cover the return freight. If a pump arrives damaged, note it on the delivery receipt before signing and tell us on the day it arrives. Full return policy.

How do I pick a model?

Start with the flow and the head or pressure your system needs. The finder above draws your point on the curves. Put your numbers in the request and we check the model with you before you order.

Where is it used?

  • Pressure boosting for potable water systems
  • Solids-free water in industrial and municipal plants
  • Fire system jockey pumps
  • Boiler feed
  • HVAC circulation
  • Irrigation

Price and freight in one quote

Send the model, quantity and ZIP. No card required.

Genuine Tigerflow

Authorized Tigerflow distributor

Talk to our team

(956) 843-0090, Mon to Fri, 8 AM to 5 PM Central. Se habla español.

Enviro Membranes.

Tigerflow pumps and NanoH2O (formerly LG) reverse osmosis membranes. One supplier for membranes and pumps.

Mon to Fri, 8 AM to 5 PM Central

Shop

  • All Products
  • Brackish Water
  • Seawater
  • Pumps

Resources

  • Blog
  • Technical Library
  • Industries
  • Local Water Data
  • Agua por Ciudad

Company

  • About Us
  • Contact Support

Contact

  • info@enviromembranes.com
  • (956) 843-0090 · Se habla español
  • 1224 E. Jasmin Ave. Suite D
    McAllen, Texas 78501

© 2026 Enviro Filtration LLC, dba Enviro Membranes. All rights reserved.

Privacy PolicyTerms of ServiceReturn Policy