Tigerflow CD42 vertical multistage pump
CD series, shown: one sizeTigerflow's model key gives the CD42 a nominal flow of 42 m³/h (about 185 GPM). The number after the dash is the stage count, and more stages give more head. Stainless stages stack under a 2-pole TEFC motor, with ANSI Class 300 flanges. The finder below picks the stage count for your flow and head.
- Models
- 9
- Motor
- 7.5 to 40 HP
- Power
- 208-230/460V, 3-phase
- Connection
- ANSI 3" CL300 Flange
9 models, 7.5 to 40 HP. Send the model and quantity and we reply with your price and freight.
Usually ships in about 5 days, plus transit time.
CD series, shown: one sizeCD Series Catalog 2023 (Tigerflow)
Curves, dimensions and weights (PDF)
Find your CD42 model
Enter the flow and the head your system needs. We draw your point on Tigerflow's CD42 curves and show the smallest model that reaches it.
Recommended range for CD42: 132.1 to 286.2 GPM.
Head is the pressure the pump adds: outlet minus inlet, not your feed pressure.
Enter your flow and head to pick a CD42 model.
CD42 curves, head and flow
Curves read from Tigerflow's CD Series Catalog 2023 (page 15), 3500 RPM, 60 Hz power, clean water. Each label is the model number after the size: the stage count, and after a slash the number of trimmed impellers. Only the recommended part of each curve is drawn. On 50 Hz power a pump makes less head, so send us your numbers. This is a starting point: we confirm the model with you before we quote.
Models and part numbers
Use the finder above for your flow and head, then pick the HP and the voltage your site has here. Not sure? Put your flow and head in the request and we check the model with you.
- CD42-1/07.5 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300002982
$7,360 - CD42-2/015 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300002984
$11,239 - CD42-2/215 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300002983
$11,214 - CD42-3/025 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300002986
$16,682 - CD42-3/220 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300002985
$15,320 - CD42-4/030 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300003392
$21,371 - CD42-4/040 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300003393
$25,228 - CD42-4/225 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300003390
$19,848 - CD42-4/230 HP
208-230/460V, 3-phase
ANSI 3" CL300 Flange
Part 3300003391
$21,371
| Model | HP | Power | Connection | Part number | Price | Request |
|---|---|---|---|---|---|---|
| CD42-1/0 | 7.5 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300002982 | $7,360 | |
| CD42-2/0 | 15 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300002984 | $11,239 | |
| CD42-2/2 | 15 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300002983 | $11,214 | |
| CD42-3/0 | 25 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300002986 | $16,682 | |
| CD42-3/2 | 20 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300002985 | $15,320 | |
| CD42-4/0 | 30 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300003392 | $21,371 | |
| CD42-4/0 | 40 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300003393 | $25,228 | |
| CD42-4/2 | 25 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300003390 | $19,848 | |
| CD42-4/2 | 30 | 208-230/460V, 3-phase | ANSI 3" CL300 Flange | 3300003391 | $21,371 |
Specifications
- Pump type
- Vertical multistage centrifugal pump
- Impellers and body
- 304 and 316 stainless steel
- Pump head and base
- Cast iron or 316 stainless steel
- Shaft seal
- Cartridge seal: carbon, silicon carbide and Viton
- Motor
- NEMA TC frame, TEFC, 2-pole
- Liquid temperature
- 5 to 248°F (every part number on this page is Tigerflow's hot water version)
- Liquid pH
- 5 to 9
- CD series range, all sizes
- Up to 570 GPM and up to 805 ft of head
- Drinking water
- NSF/ANSI 61 and 372 certified pump (Tigerflow's UL certification)
From Tigerflow's catalogs, brochures and price list.
Ordering
How fast does it ship?
Usually ships in about 5 days, plus transit time. Your quote includes the freight.
Is it genuine Tigerflow?
Yes. We are an authorized Tigerflow distributor, and Tigerflow's warranty passes through to you.
What warranty does it have?
24 months from the ship date against defects in materials and workmanship. Parts that wear in normal use, such as mechanical seals: 9 months from the ship date or 6 months after installation, whichever ends first, if the installation report is sent in. Tigerflow repairs or replaces at its option; the buyer pays removal, reinstallation, labor and freight. Send warranty claims to us and we take care of them.
Can I return it?
Unused pumps and systems only, with our written authorization first. 25% restocking fee. The buyer pays return freight; original freight is not refunded. Defects go through the warranty. If the wrong pump was sent, there is no restocking fee and we cover the return freight. If a pump arrives damaged, note it on the delivery receipt before signing and tell us on the day it arrives. Full return policy.
How do I pick a model?
Start with the flow and the head or pressure your system needs. The finder above draws your point on the curves. Put your numbers in the request and we check the model with you before you order.
Where is it used?
- Pressure boosting for potable water systems
- Solids-free water in industrial and municipal plants
- Fire system jockey pumps
- Boiler feed
- HVAC circulation
- Irrigation